智能天线对移动通信网性能的影响

智能天线是目前移动通信中的热点话题之一，也是提升网络容量和改善传输质量的关键技术。本文简要介绍了智能天线基本概念，原理及其在无线网络中的重大作用。     

淤泥软基爆炸固结试验研究

对爆炸效应在淤泥软基工程中的应用问题进行了探讨，并首次提出了爆炸在淤泥软基中的分界应力特征以及排水固结及破坏分区的基本模式。为采用动力加速对淤泥软基工程的处理，提供了试验依据，具有实用价值和指导意义。     

An Acoustic Converter Used to Measure Ionizing Radiation Energy Loss

A monitor is proposed based on ultrasonic production when ionizing radiation passes through a medium. The recording element is a 0.2 mm aluminum plate mounted in a ceramic acoustic converter AC in the form of a wedge of thickness 2 mm. The low plate thickness minimizes the beam parameter distortion, while special technology used in the AC provides high sensitivity. The device has been calibrated in the proton beam from the ITEP accelerator at 200 MeV with 2·10⁹–6·10¹⁰ particles in a pulse and a pulse length of 70 nsec.     

Modeling of Material Deformation Kinetics in the Prefracture Zone

Based on the concept of complete stress–strain diagrams, we propose a new model describing the law of stress distribution in the prefracture zone in plastic materials in view of the type of the stressed state.     

入射光的偏振和强度对分光镜透／反比的影响

采用能量流分析法推导了一束线偏振光经分光镜分光形成透射／反射光的能量表达式。分别讨论了入射光强度不变而偏振方向变化以及二者同时变化对分光镜透／反比的影响。通过旋转主光路中的偏振片来模拟入射光的偏振方向和强度变化，实验验证了分光比的变化规律。     

电子显微学在结构生物学研究中的新进展

电子显微学是结构生物学的重要分支，已经成为一种公认的研究生物大分子、超分子复合体及亚细胞结构的有力手段。本文先回顾了近期电子显微学在技术上的新进展，后概述了生物电子显微学的三个组成部分——电子晶体学，单颗粒技术，电子断层成像术的基本原理，技术方法与研究现状。最后，对电子显微学与其他结构生物学研究手段的结合以及电子显微学的未来发展做了简单的展望。     

液态金属离子源发射尖的制备工艺与技术

发射尖是液态金属离子源(LMIS)的关键部件之一，其性能的优劣直接影响到整个离子源的工作稳定性。通过对系统软件和硬件的设计，开发了一套发射尖自动腐蚀装置，该装置可以对发射尖腐蚀过程中的速度和深度以及腐蚀电压进行控制，实现发射尖腐蚀工艺的重复性、可靠性，从而为液态金属离子源以及聚焦离子束系统的研制、开发提供了一个有效的辅助工具。     

Chemische Zusammensetzung und Mikrostruktur polymerabgeleiteter Gläser und Keramiken im System Si–C–O. Teil 2: Charakterisierung der Gefügeausbildung mittels hochauflösender Durchstrahlungselektronenmikroskopie und Feinbereichsbeugung

Chemical Composition and Microstructure of Polymer‐Derived Glasses and Ceramics in the Si–C–O System. Part 2: Characterization of microstructure formation by means of high‐resolution transmission electron microscopy and selected area diffraction Liquid or solid silicone resins represent the economically most interesting class of organic precursors for the pyrolytic production of glass and ceramics materials on silicon basis. As dense, dimensionally stable components can be cost‐effectively achieved by admixing reactive filler powders, chemical composition and microstructure development of the polymer‐derived residues must be exactly known during thermal decomposition. Thus, in the present work, glasses and ceramics produced by pyrolysis of the model precursor polymethylsiloxane at temperatures from 525 to 1550 °C are investigated. In part 1, by means of analytical electron microscopy, the bonding state of silicon was determined on a nanometre scale and the phase separation of the metastable Si–C–O matrix into SiO₂, C and SiC was proved. The in‐situ crystallization could be considerably accelerated by adding fine‐grained powder of inert fillers, such as Al₂O₃ or SiC, which permits effective process control. In part 2, the microstructure is characterized by high‐resolution transmission electron microscopy and selected area diffraction. Turbostratic carbon and cubic β‐SiC precipitate as crystallization products. Theses phases are embedded in an amorphous matrix. Inert fillers reduce the crystallization temperature by several hundred °C. In this case, the polymer‐derived Si–C–O material acts as a binding agent between the powder particles. Reaction layer formation does not occur. On the investigated pyrolysis conditions, no crystallization of SiO₂ was observed.     

ㄇ形梁剪力滞效应的解析解

精确分析ㄇ形梁在纵横向荷载共同作用下,其横断面上正应力分布规律对于计算其有效宽度有重要意义,应用力法原理,先将ㄇ形梁和翼板截开成矩形截面梁和平面应力板,在截面上代之以赘余的分布剪力,对于平面应力板,通过利用板变形的对称性来简化其边界条件,然后假设一个满足板的控制方程的Airy应力函数求得板的应力和位移,再利用Timoshenko梁理论求得梁的挠度和转角,根据截面上梁与板的纵向位移相等的变形协调条件便可最终确定截面上的分布剪力,给出的数值算例验证了方法的有效性,并与铜陵长江公路大桥主梁的模型有限元结果和试验结果作了对比,解析解法还可用来检验其他各种数值计算方法的精度,并可推广到其他多跨薄壁结构梁桥的膜应力分析中。     

Analysis and simulations of vibrations of a beam with a slider

A model for vibrations of a beam with a slider is derived, analysed and numerically simulated. It describes a viscoelastic beam that is clamped at one end to a vibrating device, while the other end moves between two stops attached to a slider. The contact is described by the normal compliance or by the Signorini conditions. The existence of weak solutions is established using the theory of set-valued pseudomonotone operators. The model is discretized using fourth-order spatial discretization, the solutions are numerically simulated and their results presented. The dynamics of the vibrations are depicted and so are the noise characteristics of the system.